Our Building Blocks


We have been spending the last month getting our Faswall ICF (Insulated concrete form) blocks from a yard in the valley where they were delivered, up to our build site.  We finally got all 30 pallets delivered so far (2-3 more are to be delivered soon) up to our build site.

Unloading the Faswall blocks on our building site.






We were able to bring only two pallets up to our site at a time due to weight issues, so we had to make fifteen trips.  During the time we were getting our block, we have endured two flat tires on the trailer and an evacuation due to a wildfire near our ridge! This is one of the biggest reasons we are building with Faswall… they don’t like to burn!  

It was scarier at night when you could see the red glow of the fire.  The sparks made it look like molten lava.  The good news is that we are blessed to have some of the best firefighters around, so we only had to endure a couple of days of evacuation and everything turned out just fine… at least for us.  My heart goes out to all those who lost their homes.  We also bought construction insurance, because you just never know!

And here they are:

And here:

And over here too:

We separated the blocks into type, and put each type on a different location at the building site, so that when we are actually building the walls it will be easier to retrieve the proper block/blocks.  The whole Faswall system of blocks includes several different types.  We aren’t using all they have available because, for instance, we only will be using outside corners, no inside corners.

The “standard” block looks like this:Building with Faswall ICF

As you can see, it’s similar to a concrete (CMU) block in shape.  Faswall blocks are 24” long, 8” high and 12” width.  In the standard block, there is a 3” polyisocyanate insulation insert, which is the one pictured above.  We will be using standard blocks with 2” insulation inserts as well.  The smaller inserts leave more room in the voids, which means there will be more concrete, so you get an even stronger wall. You can see the ends of the block have an interlocking shape, which stabilizes the block wall and helps to prevent “blow-outs” when the concrete is poured into the forms.  The blocks are “dry stacked” on each other in a running bond fashion, to about 4-5 feet high, which is called a “lift”.  Once a lift is stacked, concrete is poured into the forms, which in effect creates a grid of concrete in the walls.

Cool, huh?

Building with Faswall ICF The picture above shows two standard blocks stacked on each other, so you can see the horizontal void where concrete flows to form the grid.  Of course, as we are stacking, we add rebar in the voids, which adds to the strength of the concrete walls.  The blocks will be placed in a running bond pattern, much like CMU blocks.  When the walls are completely done and cured, they will be extremely strong, fire resistant, pest resistant and energy efficient.

I truly believe this house is going to be standing for hundreds of years!

Then there are the end blocks.  These blocks do not have the interlocking shape on both sides, but instead just one side.  Building with FaswallThese are used at the windows and doors. When the walls are all done and it’s time to put in the windows and doors, they are installed just like you would install into a wood framed house.  You see, Faswall IS made of wood… just mineralized with concrete and a special process to make it very fire resistant!  That’s why when it is necessary to cut a form, we use regular wood cutting tools, like a circular saw or a Sawzall.  And when installing doors and windows, you can nail and screw right into the walls!

The corner blocks are used for, well, corners!

You can see there are the interlocking ribs on the end and one side so that the interlocking ribs from another block fits right in, making a perfect corner!

The last blocks that we will require are the all purpose blocks.  These can easily be cut in half and used wherever a half block is needed, especially around windows and doors as a half end block.  Since the blocks are set in a running bond fashion, we will need one of these half blocks every other row.

The all purpose blocks are made to easily be cut in half and used where needed.  For us, we will be using these at the windows and doors.

faswall ICF corner blockWe were happy to find, in the end, only seven blocks total that were damaged.  I think that’s pretty good considering the almost two thousand blocks that we got so far.  We were talking with a friend who recently build his “stick” house (conventional wood frame) and said he had to return a lot of lumber that was twisted and/or warped or just plain unuseable. We have already verified that these broken blocks will be added to our last shipment, which will be soon.

So far, I’m glad we are building with these ICF forms and the company we chose.  We’ll see how things go in the future.

When do we start?

The guys setting up the forms for the footings are supposed to be here today, but in reality we don’t expect to see them until next week.  Once the footings are poured, we can start setting blocks!

I am just over the moon excited!

I can’t wait to show you our progress!

In the meantime, I need to get a new pair of gloves.  These building blocks bite!  I have to say that the one downside we have found so far is that the blocks are very sharp and will tear your clothes and skin if you are not careful.  That’s the bad news…  which is also the good news!  The good news is that they are rough, which makes it much easier and cheaper to stucco the outside and plaster the inside!

What else have we been doing?  I’ll show you in the next post!

This is where the party is:Thank Goodness It’s MondayClever Chicks Blog HopGrand SocialMix It Up MondayCreate, Link, Inspire;  Amaze Me Monday,  Homemaking MondaysShow & Share TuesdayThe Gathering SpotBrag About ItTuesdays with a TwistThe ScoopTwo Cup Tuesday;  Inspire Me TuesdaysTuesdays at Our Home;  Party In Your PJ’s;  Show Me YoursMake, Bake and Create;   Wined Down Wednesday;  Fluster’s Creative Muster;  Homestead Blog HopWow Us Wednesday;  Wonderful Wednesday;  Waste Less WednesdayAIM LinkyOur Simple Homestead; Share Your Cup Thursday;  Home and Garden Thursday;  The Handmade HangoutThink Tank Thursday;  Homemaking Party;  This Is How We RollNo Rules Weekend Party;  Friendship Friday;  Family Fun FridayFriday’s Five FeaturesAwesome Life Friday;  Home MattersTraffic Jam WeekendSaturday Sparks;  Dare to ShareScraptastic SaturdayShare It One More TimeHappiness is HomemadeAnything Goes Pink SaturdaySimple SaturdaysThat DIY Party;  DIY Sunday ShowcaseSnickerdoodle Sunday;   Best of the BlogosphereSmall Victories Sunday

We Got Our Building Permit!

Wahoo   🙂

It’s about time!  We finally got our building permit!

We can’t wait to get started!  Some friends of ours gave us a bottle of wine from their new vineyard (thanks Ronda and Leonard!), and as soon as we break ground for the footings, we are going to open that bottle and celebrate!

The Reynoso Brothers hard at work last year, getting our building site ready to build.

Right now we are in the process of finding our “subs”.  We decided to go ahead and build the house by ourselves, acting as our own contractor, and subcontract out the stuff we can’t or don’t want to do, including the concrete footings and slab, rough plumbing and electrical, interior wall framing and the roof.  Fastwall is supposed to be a DIY building project, and since we live on the site, have sound bodies, and are reasonably intelligent, we figured we should be able to stack the walls ourselves.  Paul Wood, one of the owners of Faswall, has been very helpful so far and has all the technical knowledge in his head, so we are hoping to rely on him when we get into any pickles… and I am certain we will!

In the meantime, we are trying to get at least three estimates for each of the above specialties… except for the concrete footings and slab.  We already signed a contract with the company who cleared our building pad last year:  The Reynoso Brothers. When they were up here last spring, they came on time, did exactly what they said they would (and more), and were reasonably priced.  So, we felt that it was a “no-brainer” to go with them again.

Some of our “raw” backyard that we are getting cleaned up to provide defensible space in the event of a wildfire.

While waiting for the estimates, we have been trying to develop our “defensible space” around the house site, which is required to get our final inspection approved.  This has been hard, dusty, sweaty work.  We need to rake up the loose “duff”, pull out a lot of trees and bushes, remove the dead wood, and cut off the lower 6-8 feet of limbs from the trees.  Once this is all done, we should have the “park-like” setting we have always envisioned around the house.

Finding a plumber has been quite a challenge.  Apparently, plumbers can make more money fixing leaky toilets and replacing water heaters than they can doing rough plumbing in a new house. Barry, the House Planner who did our electrical plans (since our architect or engineer wouldn’t do them) told us that the plumbing really wasn’t hard to do, and that we should just go down to the library and get some books to figure out how to do the plumbing ourselves and save a ton of money!  Hmmmmm… that’s a scary thought. Still, it would be nice to save some money.  I just wish we could find a plumber who (for a fee) would draw a plumbing plan and give us a list of all the stuff we would need, along with some technical advice, and then we could do it ourselves.  Are there any plumbers out there that do this kind of thing?

Our house site, ready to go!  We have wooden stakes at all four corners, and also delineating the back patio.  Unfortunately, we have pretty much given up on keeping these in the ground because our neighbor’s dogs seem to think they are sticks to “go fetch”!  😉

As far as the outside walls that make up the shell of the house, I am pleased to announce that they are on our build site… mostly!

Here are all the stacked pallets of our Faswall blocks… all 30 of them, in the yard at Endeavor Homes.  Faswall could fit only these 30 pallets on the delivery truck, so we still have 2 more pallets coming.

We are building our home with Faswall, which is a type of insulated concrete form (ICF).  The ICFs are 12 inches thick and 24 inches long.  Their shape is similar to concrete blocks (CMUs), but are made from shredded wood mixed with concrete, with a 3” insulation insert.  Once we stack the blocks about 4-5 feet tall around the entire perimeter of the house, concrete is poured into the center voids, which will make a grid pattern of concrete in our walls.  So basically, it will be a concrete house, which is good to have in a forest.

Loading the pallet onto our trailer

We have been hauling the blocks up to our property two pallets at a time.  Unfortunately, we have to break them down (one block at a time) into half high pallets for a more stable trip up the mountain to our property, and once on site we unload each block individually, stacking them 6 blocks high, into groups of block type.  You see, there are the “Normal” blocks that make up the majority of the walls.  Then, there are the corners, the end blocks, and the normal blocks with smaller 2” insulation.  The 2” insulation blocks are for certain areas in the walls that need a bit more concrete for structural support, so the insulation is thinner.  And then there are the specialty blocks, that can be easily cut in half and used as end blocks.  I will get to the shape and purpose of those blocks in my next post. Special thanks to my youngest son, Michael, for helping haul a lot of pallets!

Unloading the Faswall blocks on our building site.

So far we have hauled 24 of the 30 pallets delivered up to our build site.  Faswall still needs to deliver 2 more pallets of blocks (only 30 fit on the truck), and apparently those will be coming soon.  The blocks were delivered to a large yard owned by Endeavor Homes, a company that sells lumber and “kit” houses, because we weren’t sure that the semi-truck delivering our block would be able to get into our build site.  Nor could we find a forklift to rent, so that we could off-load the delivery truck.  The guys at Endeavor unloaded our blocks and let us use their space for free!  Of course, we will be buying lumber from them, but these days it is so hard to find anything free and we are so grateful for their generosity!  Thank you so much Dell!

This is a stack of the standard block with 3″ insulation.

Lifting and stacking those blocks is really getting me into shape. You should see my biceps!   By the time we get done with the Faswall, we will have lifted almost every block by hand three times – once to get it stacked on the trailer, once to unload on the house site, and once more when we actually build the walls.  The best news is that so far we could find only six blocks that are damaged.  We will wait until we get the rest of the block up here, so that we can take a final accounting, but I am assuming Faswall will replace the damaged blocks.  Out of the hundreds and hundreds of blocks we have handled so far, I think only six damaged blocks is pretty darn good!

So… what’s next?

The Reynoso Brothers will be coming up in a few weeks to dig, frame and then pour our concrete footings.  Of course, that’s if we can get concrete.  Our new home is about a 45 minute drive above Oroville Dam, and you might remember hearing about the Oroville Dam spillway failure early this past spring.  So, the dam repair is getting first priority for concrete, which of course, they should!

And here we are trying to build a concrete house…

The truth is, however, that we have come this far and there is no going back now, so we will just have to take the concrete when we can get it.

I can’t wait!  I can’t wait!  I am so excited to be finally building our new home!


This is where the party is:Thank Goodness It’s MondayClever Chicks Blog HopGrand SocialMix It Up MondayCreate, Link, Inspire;  Amaze Me Monday,  Homemaking MondaysShow & Share TuesdayThe Gathering SpotBrag About ItTuesdays with a TwistThe ScoopTwo Cup Tuesday;  Inspire Me TuesdaysTuesdays at Our Home;  Party In Your PJ’s;  Show Me YoursMake, Bake and Create;   Wined Down Wednesday;  Fluster’s Creative Muster;  Homestead Blog HopWow Us Wednesday;  Wonderful Wednesday;  Waste Less WednesdayAIM LinkyOur Simple Homestead; Share Your Cup Thursday;  Home and Garden Thursday;  The Handmade HangoutThink Tank Thursday;  Homemaking Party;  This Is How We RollNo Rules Weekend Party;  Friendship Friday;  Family Fun FridayFriday’s Five FeaturesAwesome Life Friday;  Home MattersTraffic Jam WeekendSaturday Sparks;  Dare to ShareScraptastic SaturdayShare It One More TimeHappiness is HomemadeAnything Goes Pink SaturdaySimple SaturdaysThat DIY Party;  DIY Sunday ShowcaseSnickerdoodle Sunday;   Best of the BlogosphereSmall Victories Sunday

A Homestead Without A Home

NOTE:  I have removed the names of our architect and the engineer from this post and replaced them with their initials.  The reason?  We live in a litigious society and some people, who I will NOT name, may not want to accept the truth about their poor business dealings.  I do not forgive them, nor will I forget, but I don’t want to spend time away from building our home while in court defending the truth.  So, if you read this post and want to know who I am referring to, let me know and I may get in touch with you in a less public format via e-mail.  Thanks

What’s a homestead without a home?

We have been working for two years… TWO YEARS, trying to get our architect and engineer to produce working and legal house plans.

Here’s the backstory.

Ray and I purchased five acres of mountain property fifteen years ago and have slowly developed it over the years, while we lived and worked in our home in the Sacramento Valley.  First was the septic system, then came the well.  We blazed a driveway through our property and brought in four truckloads of gravel. We planted our orchard.  We prepared a nice place for our travel trailer (you can see that post HERE), since we would be living in it while we were building our new house, and beefed up the solar system (see that post HERE) to minimize the need to run a generator, lessening our dependence on fossil fuels.  The house site has been graded and leveled for more than a year now.

This is our nice, level building spot! The orange tape on the stakes indicate where the septic tank is. This picture was taken in April of 2016 and our building lot has remained empty since!

We also built our beloved outhouse.  We built the outhouse for many reasons, some of which you can read in a previous post about the outhouse HERE.

how to build an outhouse

Our outhouse.

The summer before Ray’s retirement, we had a 20 foot long cargo container (read about that HERE) delivered to our property, to store the household items that we were keeping, and over the next ten months we decluttered our house, spruced it up and started filling up the container, getting ready to put our house up for sale upon Ray’s retirement.


We must have done a good job, because we put our house up for sale by owner before Ray actually retired, just to feel out the market, and sold it sooner than we expected.

Fortunately, we were prepared, the escrow went very well, Ray finally retired, and we moved up to live on our property permanently in late March of 2015.

The family room of the house we sold so that we could build a new home on our mountain property. Oh how I miss that house!

So, that’s the backstory.

We have planned to build the outside walls of our home with Faswall ICF (insulated concrete form), which is a mineralized wood product formed into what looks like a very large concrete building block. These are stacked much like Legos and then the voids are filled with rebar and concrete.  After studying several ICF systems and weighing the pros and cons, we felt the Shelter Works Faswall was a superior product and decided to contract with them.

This is a screenshot of an e-mail I sent to our architect, dated February 6, 2015. You can click on the picture to make it bigger and easier to read.

We were referred to an Engineer, D.S. (whom we will now call Engineer), who was familiar with the Faswall system and, although he lived in Oregon, had a California Engineer’s license.  In several e-mails we told Engineer that we were DIYers and were wanting to build on a limited budget, as we did not want to have a mortgage.  He assured us that this was definitely a DIY project and that in the long-run, the house would not cost more than a house that was stick-built.  He also said that his costs would be very reasonable.  But first, we would need an architect to actually draw the plans, and Engineer referred us to J.S. (now called Architect), also out of Oregon, to draw the plans.  Architect does NOT have a California license, but Engineer assured us that it was okay, because his California license would cover everything.

So, we signed a contract and sent a deposit to Architect TWO YEARS AGO this month.

This is the main floor plan I sent to the Architect, so that he could convert it to easily build with Faswall Blocks and also to bring it up to California Code.

I sent the house plans I had been working on for several years using a software package I had purchased at Staples. All Architect had to do was make them fit with the Faswall system (each block is four feet long) and make sure the plans passed California Building Codes.

In fact, other than the final dimensions, his preliminary plans almost exactly mirror the plans I sent him. Again, we emphasized to Architect in e-mails and phone calls that we wanted to build as cheaply as possible, and that we were planning to do the bulk of the work ourselves, though we were NOT licensed contractors!  Thank goodness we saved every single E-mail, in case this ends up going to court.

This is the plan the architect came up with. Not much different than mine, is it? So, why in the world would it take so long to come up with the final plans?

FOURTEEN months later, they finally had everything necessary to submit our building package to the planning department for inspection and review.

Why would it take so long?  We wish we knew!  We begged, we nagged and we pleaded, to no avail.  Is it because we made a lot of changes to our plans?  NOPE!  We had Architect remove two windows on the second story that HE put in and we didn’t want, and I had him flip flop the shower with the toilet room in the master bath on the preliminary plans.   That’s it.  Seriously!

Why am I naming names? Because these are the cold, hard facts.  I am not worried about slander, much less libel, because I am telling the truth, as hard as it is to swallow.  I have saved all our e-mails, and our local county personnel will back me up on all of this, and so since I refuse to sugar coat anything, I am naming names.  Perhaps I can prevent someone else’s heartbreak.

When we finally submitted the plans, we got the results of our first review back from the “plan checker”  within two weeks.  There were pages and pages and pages of things that were missing, incomplete or just plain wrong in our house plans.


UGGGGHHHHHHH!  This was in late July of 2016.


In the meantime, we had a bunch of contractors up to our property to give us bids on the foundation work.  That was one of the only things we were not planning to do ourselves (besides the roof), because we wanted to have a good foundation to build on!

Contractor after contractor told us that just the basement alone was going to cost between $50,000 to $60,000.  Holy @%$&


Because our home was essentially three stories (basement, first floor, second floor) some of the footings were to be seven feet wide!  And one of the basement walls had to be a solid concrete wall (filled with rebar) 35 feet long, 10 feet high and eight inches thick, to hold up the house above.

Did someone forget all the e-mails about this being a DIY project with a reasonable cost?  Why did they ignore our requests and communications?  Were we speaking Chinese?

You hire professionals to work for YOU, to listen to YOUR problems, to understand what YOU need and to provide that service!  Wouldn’t the Architect and Engineer know that the basement with the huge footings and that concrete wall were going to be extremely expensive and certainly NOT a DIY project?  If one of them had warned us of that in the preliminary stages, we would have nixed the basement right away! But after the preliminary plans were done, there was very little communication, other than the bills they sent us.

Which we always paid with a week of their receipt.

So, after realizing that a basement was not worth a huge chunk of our budget, we asked the architect and engineer to remove it from our plans, along with correcting the pages of errors the plan checker had sent.  Oh, and we added a small retaining wall across our back patio and removed the fireplace.  It took more than six months for them to do this.  SIX MONTHS!  Because of that, we missed out on another building season.  And then they had the audacity to charge us thousands of dollars more!  Oh, and I forgot, since Oregon does not require electrical or plumbing plans (apparently those inspections are done in the field), Mr. Architect and Mr. Engineer refused to do ours. But wait…  we were assured by Mr. Engineer that since he had a California license, he would make our plans California compliant.  I have that in an e-mail and told him so, but they still refused. So, we had to hire a house planner who is licensed here in California to do this! 

Do you see a theme here?

We finally were able to turn in everything for our second review in February 2017.  Were we good to go?  NOPE.  Again, errors and omissions. To top it off, now WE have to pay more than $160/hour for the next building review (the third), for mistakes and omissions our Architect/Engineer are responsible for!

What a scam.

This past winter was brutal.  If you have been following this blog for very long, you know that we moved from our travel trailer into our “cottage” over a year ago.  See the post of our cottage HERE.  Travel trailers are not meant to be lived in 24/7, and we were burning way too much propane just to keep warm.  We were having to drive 45 minutes to get to town just to buy more propane!  It was insane!  Hey…  that rhymes.  😉

Living in a tiny cottage

Our saving grace this past winter has been our tiny wood stove.  Thankfully, it heats our little cottage really well…  sometimes too well!

Anyway, this past winter here in Northern California was the fourth wettest since recording began.  While living in the cottage to stay warm, every time I had to use the bathroom, I had to go out into the cold rain and sometimes snow. We were still showering and cooking in the trailer, so I was having to constantly go back and forth between the cottage and the trailer, oh, and the outhouse.

In the rain.

And snow.

The truth is, this is not what we signed on for.  I thank God that Ray and I are best friends, because this has really been a strain on our marriage and I wouldn’t wish this situation on our worst enemy.

So far, we have wasted two precious years, our retirement years, waiting for Mr. Architect and Mr. Engineer to do their jobs. When Ray sent ANOTHER e-mail to them to see what the status of our plans are, essentially they responded that they were working on them.

Yeah.  Right.  If you believe that, I have a bridge in Taiwan I will sell you cheap for $10,000!

We need a house.

One that we can call home.

If it takes any longer just to get plans to build a Faswall home, it’s not going to happen and we are truly heartbroken!  The Faswall folks have had our money for the blocks for a year and a half now (we made our final payment December 2015), and we will be asking for a full refund.  Luckily, Faswall won’t lose one cent, because they don’t manufacture the blocks until arrangements have been made to pick them up.  The truth is, they probably MADE money through interest over the past year and a half!  Luckily, our contract with Faswall states that if we don’t get a permit to build, and we haven’t (through no fault of our own), we will get a full refund. We are talking almost $24,000 here, folks!

We are also considering whether we will sue J.S. and D.S..  We have contacted quite a few architects in the area, and have been told that two years for a residential house (nothing fancy here, just a normal, everyday house) is not even fathomable…  It’s insane!  It’s unheard of!  In fact, ONE year (according to EVERY contractor we asked) is crazy!  So, I don’t think we will have a problem winning that one.

If you have made it this far in the story, I would really like to have your opinion.  You, my faithful followers, have given me great advice in the past.  What do you think?  Should we give Mr. Architect and Mr. Engineer another month to get the plans right and hope to get our Faswall dream house, knowing that it will be ANOTHER year before we can get started?  Or, should we cut our losses (time), go to court to get all of our money back, and start again from scratch?

Getting Ready to Build!



We have been working with an architect and an engineer to design our house plans, and were finally able to submit the plans to our building department last month.  They wanted a small fortune in building fees, but our biggest shock was the $8,500 + impact fee to our school district.  Holy cow, I think we just paid for half a classroom!

In the meantime, we have been getting bids for the final excavation and foundation work.


The estimates are much, much more than we anticipated.  The problem is that we are essentially building a three story structure, so the foundation under the basement is requiring 7 foot wide footings and a poured in place concrete wall 8” thick and 35’ long!  Holy Cannoli – we can’t afford that!  Especially since the concrete trucks are tacking on a premium to bring the concrete up the mountain to our property.  (Some silly thing about diesel costing a lot 😉 of money)

This is one version of the main floor of our house plans. I can't wait to live in this house!

This is one version of the main floor of our house plans. I can’t wait to live in this house!

Hmmmmm…  So, we thought long and hard about this.  Why do we want a basement?

  1. The back third was going to be walled off and turned into a root cellar.
  2. Storage – canned goods, household stuff and, of course, junk.
  3. A cool place to sit on a hot afternoon.

We decided (no brainer) we can always build a root cellar elsewhere.  Also, going up and down stairs when I am 85 years old to get my canned goods and stuff – well, let’s just say it’s not something I am looking forward to!  Besides, this is supposed to be our final forever home, and we need to have everything required for everyday living on one floor!  The upstairs only has two bedrooms and a bathroom, so I will only need to go up there when we have guests!

Therefore, we decided to send the plans back to the architect and engineer and nix the basement.  Besides, they had LOTS of changes to make for the county plan checker anyway. Let me tell you – California has some crazy codes that we must adhere to!  More about that later.  Now, if you look at the floor plan above, maybe we could turn the area where the stairs going down to the basement would have been into a nice long pantry? What do you think?  We will see what the architect says.

People warned us that this was a very long, frustrating process, and let me tell you…  they were so right!

This is what the Shelterworks Faswall block looks like.

This is what the Shelterworks Faswall block looks like.  You can see lots of beautiful homes built with these blocks on their website – which is also where I got this picture!  🙂

In the meantime, we have already purchased the Insulated Concrete Forms, or ICF.  We decided to go with a company called ShelterWorks and their product called FasWall.  We have done a lot of research for a few years now, and these FasWall ICFs are probably the easiest to work with, the most insect and fire resistant, and breathable insulated forms on the market today.  FasWall is also easier to build with because regular carpenter tools are used and, unlike the plastic ICF, you can actually screw or nail into the form at any place.  One more reason we were sold on FasWall is that the wood used in the form is made from mineralized and recycled shredded wood from old wooden pallets.  The ICFs are stacked together like Legos, with rebar placed vertically and horizontally within the cavity of the ICFs, and then concrete is poured into the cavity.  Essentially, this makes a waffle grid of concrete within the walls, and gives the effect of superior insulation and stability.

Doesn’t that sound fantastic?

It does cost a bit more (5-10%) to build a home with these forms than it does a stick built house.  However, the payback comes with the energy savings.  The houses built with these forms are solid, very energy efficient, almost sound-proof, and essentially pest (think termite, carpenter ant, mouse) proof!  Also, the fire resistance of these ICF walls is important when you consider that we are living in the middle of a forest here in Northern California, where wildfire is not at all uncommon.  We have been working with Paul Wood, one of Faswall’s representatives, who has been very helpful in getting our building plans moving forward.

This big old Douglas Fir just had to go. So sad. We wanted to use the wood in our house, but California code required that it be graded and certified by a professional - timely and costly. Yet another one of those "codes" run amuck!

This big old Douglas Fir just had to go. So sad. We wanted to use the wood in our house, but California code required that it be graded and certified by a professional – timely and costly. Yet another one of those “codes” run amuck!  Grrrrrrrrr…

In the meantime, we have been getting our building site ready.  We had some beetle killed trees that needed to come down, and a couple other smaller trees that were right where our living room will be, so they all had to go.  We had a massive Douglas Fir that we wanted to save (above), but sadly, after some excavating and figuring right where the house would go, we realized that it was going to be too close to the house for fire safety.  Not to mention the fact that it was leaning right toward where our master bedroom was to be.  Since the tree was too big for Ray’s chainsaw, we called in Clyde, a Professional and Licensed Logger to drop the tree for us.

The beginning of excavation to make a flat building site - first you have to remove the tree stumps!

The beginning of excavation to make a flat building site – first you have to remove the tree stumps!  These guys made it look too easy.

The initial excavation has also been done.  The excavators popped out the tree stumps we had cut, scraped the lot clean of brush, and then cut into the hillside a bit so that the land would be level.  They were wonderful to work with and very respectful of our property, keeping clear of the septic tank so they wouldn’t damage it.

All of the brush was piled into a huge pile, so later Ray and I burned most of it, and cut up for firewood what was large enough to bother with.  It took us several days to get that accomplished, and we were able to get the brush burned before our burning permits were restricted for the fire season.

This is our nice, level building spot! The orange tape on the stakes indicate where the septic tank is. We have been busy burning duff and forest debris, trying to get the house site "fire-safe". It sure is a lot of work!

This is our nice, level building spot! The orange tape on the stakes indicate where the septic tank is. We have been busy burning duff and forest debris, trying to get the house site “fire-safe”. It sure is a lot of work!  The ashes are about where the kitchen will be, and the trees will be the view looking south-east out our front windows!

We are also busy raking up the forest duff, pulling out small bushes and trees, and laddering up the trees that will remain, so that the immediate area thirty feet around our house will hopefully keep a wildfire from getting too close to our house, and help firefighters to defend it.  Nancy, from our county fire department, will be up soon to tell us how we are doing and what else we need to do to make our home fire safe. Unfortunately, getting homeowner’s insurance in our neck of the woods is nearly impossible, so we want to make our home as fire safe as possible!

So, wish us luck, send good thoughts, or even a few prayers that our architect and engineer don’t take too long to get the changes and corrections made to our plans!  I would really like to at least have our foundation poured this year – God willing!


Here are some parties I attend:

Thank Goodness It’s MondayClever Chicks Blog HopGrand SocialMix It Up MondayCreate, Link, Inspire;  Amaze Me MondayMotivation Monday;  Homemaking Mondays; Show & Share TuesdayThe Gathering SpotTuesday Garden PartyBrag About ItTuesdays with a Twist;The ScoopTwo Cup TuesdayTweak It TuesdayInspire Me TuesdaysTuesdays at Our Home;   Lou Lou GirlsParty In Your PJ’sYou’re Gonna Love It  Make, Bake and Create;  Wicked Awesome Wednesday; Wined Down Wednesday;  Wake Up WednesdayFluster’s Creative Muster;  Homestead Blog HopWow Us Wednesday;  Wonderful Wednesday Our Simple Homestead; Share Your Cup Thursday;  Home and Garden Thursday;  The Handmade HangoutCreate it Thursday;  Think Tank Thursday;  Homemaking PartyTreasure Hunt ThursdayThis Is How We Roll; Inspire or be Inspired;  Inspiration Gallery;  No Rules Weekend Party  Freedom FridaysFriendship FridayFrom The Farm Blog HopFriday Flash Blog PartyWeekend re-Treat;Family Fun FridayFriday’s Five FeaturesReal Food FridaysShow Off FridayCraft Frenzy Friday;  Awesome Life Friday Simply Natural Saturdays;  Saturday Sparks;  My Favorite Things;  Dare to ShareScraptastic Saturday;Share It One More Time  That DIY Party;  DIY Sunday Showcase;  Snickerdoodle Sunday;   Best of the BlogosphereSmall Victories Sunday

Related Posts Plugin for WordPress, Blogger...